Started flying FPV in October 2020 but have since then blown a couple of ESC. And each time I’m going to setup the new ones I ran into problems so this time I write down some notes to not have that happen again…
The most common problem I run into is that I turn on Bi-directional DShot in BetaFlight but then I get RPM_FILTER Disarm disabled flag turned on!! And cannot figure out why??
The answer and solution is quite simple. The default ESC firmware does not support bidirectional DShot! And this article describes how to get it. The ESCs I have one need to use BLHeli_S firmware. On my Nazgul 5 2 HD the ESC has the G H 30 configuration and currently I’m using version 16.73. So I download the G_H_30_REV16_73.HEX firmware and use BLHeli Configuration to flash it. Other versions can be downloaded from https://github.com/JazzMaverick/BLHeli/tree/JazzMaverick-patch-1/BLHeli_S%20SiLabs
